[. . . ] Den Rasenmäher regelmäßig auf offensichtliche Mängel wie lose oder beschädigte Messer, lose Verbindungen und abgenutzte oder beschädigte Teile untersuchen. [. . . ] The cutting cylinder should be adjusted if the grass is not cut cleanly and evenly. Turn both adjuster knobs 7 clockwise a little at time until the cutting cylinder 6 lightly brushes the bottom blade 8. D Coarse: The roller brackets 4 should be set in one of three positions according to the type of lawn: I for high range for bumpy lawns, II for medium range for average lawns and III fore low range for reasonably flat lawns. You should only need to make this adjustment once, thereafter use the , , Fine" adjustment to cut longer or shorter grass. Clean the exterior of the machine thoroughly using a soft brush and cloth. If grass cuttings are compacted in the blade area, remove with a wooden or plastic implement. Reverse at the end of the each turn, slightly overlapping the previous cut strip. Note: To ensure long and reliable service, carry out the following maintenance regularly. [. . . ] When the time comes to dispose of this product, please consider the environment and take it to a recognized recycling facility (please contact your local authority for location information). [. . . ]